features ?silicon stabilizer diodes ?monolithic integrated analog circuits designed for small power stabilizer and limitation circuits, providing low dynamic resistance and high-quality stabilization performance as well as low noise. in the reverse direction, these devices show the behavior of forward-biased silicon diodes. the end of the zte device marked with the cathode ring is to be connected: zte1.5 and zte2 to the negative pole of the supply voltage; zte2.4 thru zte5.1 to the positive pole of the supply voltage. ?these diodes are also available in minimelf case with the type designation ll1.5 ?ll 5.1. mechanical data case: do-35 glass case weight: approx. 0.13g packaging codes/options: d7/10k per 13?reel (52mm tape), 20k/box d8/10k per ammo tape, (52mm tape), 20k/box do-204ah (do-35 glass) min. 1.083 (27.5) min. 1.083 (27.5) max. .150 (3.8) max. ? cathode .020 (0.52) mark max. ? .079 (2.0) zte1.5 thru zte5.1 voltage stabilizers dimensions are in inches and (millimeters) 6/28/01 maximum ratings (t a = 25 c unless otherwise noted) parameter symbol value unit operating current (see table characteristics ) inverse current i f 100 ma power dissipation at t amb = 25 cp tot 300 (1) mw junction temperature t j 150 c storage temperature range t s 55 to +150 c electrical and thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol min. typ. max. unit forward voltage at i f = 10 ma v f 1.1 v temperature coefficient of the zte1.5, zte2 vz 26 10 4 / c stabilized voltage at i z = 5 ma zte2.4, zte5.1 vz 34 10 4 / c thermal resistance junction to ambient air r ja 400 (1) c/w
zte1.5 thru zte5.1 voltage stabilizers electrical characteristics (t a = 25 c unless otherwise noted) operating voltage dynamic resistance permissable operating current at i z = 5ma (2) at i z = 5ma at t amb = 25? (1) type v z ( ? )r zj ( ? )i z max. (ma) zte1.5 1.35 ... 1.55 13(<20) 120 zte2 2.0 ... 2.3 18(<30) 120 zte2.4 2.2 ... 2.56 14(<20) 120 zte2.7 2.5 ... 2.9 15(<20) 105 ZTE3 2.8 ... 3.2 15(<20) 95 ZTE3.3 3.1 ... 3.5 16(<20) 90 ZTE3.6 3.4 ... 3.8 16(<25) 80 ZTE3.9 3.7 ... 4.1 17(<25) 75 zte4.3 4.0 ... 4.6 17(<25) 65 zte4.7 4.4 ... 5.0 18(<25) 60 zte5.1 4.8 ... 5.4 18(<25) 55 notes: (1) valid provided that electrodes are kept at ambient temperature at a distance of 8mm from case (2) tested with pulses t p = 5ms
zte1.5 zte2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 zte1.5 ... 5.1 zte1.5 ... 5.1x zte1.5 zte2 2.4 2.7 3 3.3 3.6 3.9 4.3 4.7 5.1 ratings and characteristic curves (t a = 25 o c unless otherwise noted) zte1.5 thru zte5.1 voltage stabilizers
zte 1.5 ... 5.1 zte1.5 thru zte5.1 voltage stabilizers ratings and characteristic curves (t a = 25 o c unless otherwise noted) zte1.5 ... 5.1 3 3.6 4.3 5.1 zte
|